External Pond Pumps » Sequence Pumps

• Out-of-pond construction - NOT Submersible!
• Less than half the watt draw of comparable submersible pumps
• Ports are 2" FNPT suction and 1.5" FNPT discharge.
• Units are pre-wired with an 8' cord and molded 115V plug.
• Units can now be wired for 230V.
• Housing is molded of high strength, glass filled polypropylene.
• Quiet operation
• Dry run resistant mechanical seals.
• Stainless steel hardware is standard.
• The motors are TEFC, for excellent protection.
• Motors are aluminum for added weather resistance.
• Rebuildable, industrial grade motors.
• Three year limited warranty!

The Pond enthusiast's favorite 1000 series can push water from 1200 USgph to over 5400 USgph and pressures up to 23 feet maximum.

The Sequence pumps are external units designed for use outside of the pond only. Sequence Pumps draw less than half the watts of comparable submersible pumps. The 1000s ports are 1.5" FNPT for both suction and discharge. All units are pre-wired with an 8' cord and a molded 115V plug. Also, all units can now be wired for 230V.

The pump housing is molded of high strength, glass filled polypropylene that will last a lifetime. The sequence pumps operation is extremely quiet. All mechanical seals are dry run resistant, and all hardware is stainless steel. Sequence motors are TEFC, for excellent protection, they and the pump housing is aluminum for added weather resistance, and easy escape of heat. Each motor can be rebuilt, and comes standard with a three year limited warranty!

For larger systems, Pond Parts offers the Sequence Primer series. With an oversized, integrated 250 cubic inch basket strainer, this unit is also self-priming. The high efficiency enclosed impellers ensure low cost, high flow performance for many years.

All Sequence Primer series pumps come with Baldor® motors, 8 foot cord with 115V molded plug and stainless steel hardware. All Sequence Primer series pumps are covered by a 3-year warranty.

The Sequence Primer can be wired for 115V or 230V.

Cost Saving Efficiency - Sequence pumps produce a maximum flow rate with minimal electrical consumption when compared to "cheaper" units. The dollars saved from reduced operation can pay for the pump in a matter of months. Compare the watts used vs. the GPH ratings on these pumps as opposed to other brands. These pumps are truly amazing. Your energy costs savings continues over the life of the product.

Reliability - Sequence pumps are built rugged. The pump housings are injection-molded of NORYL®, and are mounted to custom built, totally enclosed, fan cooled motors. This unbeatable combination meets the most severe industrial standards, even the demands of chemical plants where the product is widely used. Each unit is fully bench-tested prior to shipment. When properly installed, your pump will provide years of dependable, trouble free service.

Quiet Operation - Sequence pumps installed near areas of relaxation and entertainment generate minimal noise levels.

Safety - Sequence pumps are end suction centrifugal units, designed to be placed outside the pond. This means no disturbance to the water during any required pump maintenance, no dangerous electrical situations and no devastating "oil slicks".